Plant28718 OK-112, Poteau, OK 74953
ScheduleRunning 24/7
Call(918) 649-0065 Emailcontact@polydynellc.comPresses · Resins · Secondary work
Between our line-up of injection molding machines, and the array of materials we process, we are able to complete a wide variety of projects with ease.
From tooling validation through 24/7 production runs, insert molding, decoration, and secondary assembly, we take technical resins to a finished, packed part.
Equipment fleet
The press list, as it stands on the floor. It accommodates micro parts through large multi-pound components without sending work outside.
| Clamp force | Machine make | Shot size |
|---|---|---|
| 30 ton | Cincinnati | 1.76 oz. |
| 50 ton | Demag (2) | 4.5 oz. |
| 120 ton | VanDorn | 8 oz. |
| 135 ton | Haitian | 8.7 oz. |
| 165 ton | Intellect | 8.7 oz. |
| 170 ton | VanDorn | 8 oz. |
| 170 ton | Demag | 14.7 oz. |
| 300 ton | Demag | 40.3 oz. |
| 400 ton | VanDorn | 48 oz. |
| 500 ton | VanDorn | 60 oz. |
| 600 ton | Haitian | 143 oz. |
Process control
Our presses carry computerised closed-loop monitoring that records melt temperature, injection pressure, hold time, and cooling on every cycle. When a part drifts, the record shows where.
Combined with robotic part drop and temperature-controlled molds, that keeps geometry inside print across millions of cycles rather than across the first thousand.
Specialties
Four processes, all under one roof in Poteau. A part can be moulded, fitted with inserts, decorated, assembled, and packed without leaving the building.
Primary process
01A versatile fleet of presses under closed-loop process control. Part weights run from fractional grams to multi-pound components.
Integration
02Metal inserts, brass threaded bushings, electrical contacts, and structural fasteners encapsulated inside the moulded geometry.
Finishing
03Decorative finishing in house: high-temperature foil hot stamping, pad printing, colour matching, and multi-colour logo work.
Secondary work
04Ultrasonic welding, heat staking, snap-fit integration, and unit testing so parts leave the plant assembled and checked.
Materials processed
We mold engineering-grade technical resins and commodity polymers. If your print calls for a grade that is not listed, ask; the list is what we run, not what we can run.
Impact resistance, dimensional stability, optical clarity, housing enclosures.
High thermal resistance, wear resistance, glass-filled structural grades.
Low friction coefficient, high stiffness, precision gears and bushings.
Chemical resistance, living hinges, food-grade containers, flexible caps.
Overmoulded soft grips, flexible seals, vibration dampening components.
High dielectric strength, flame-retardant electrical housings.
Quality and metrology
Quality sits in the process, not at the end of it. Incoming resin is checked, the first article is measured against the print, and statistical checks continue through the run.
Optical comparators, precision calipers, moisture analysers, and custom check fixtures decide whether a box leaves the building.
Request a capability assessment